Mykolas Romeris University Research Management System (CRIS)





Use this URL to cite this Researcher: https://cris.mruni.eu/cris/handle/007/20247
Now showing1 - 9 of 9
  • research article[2024][S1b][S004][10]
    Engineering management in production and services., 2024, p. 104-113.

    The commercial performance of a construction company (CC) largely depends on the planned work programme. The annual CC work programme is a set of objects of a specific purpose and structure (a building system). The programme has the following characteristics: first, the number of objects; second, the construction technologies provided for in the projects (fully prefabricated, monolithic, brick, etc.); third, the variation of work scopes among objects; and fourth, the construction technology. These CC work programme features are interrelated, i.e., aligned with each other, forming the technological structure (TS) of the CC work programme. Once these attributes were formalised, four partial indicators were obtained: the first assesses the variation in construction objects’ sizes; the second — their number; the third — the number of applied technologies; and the fourth — the technologies. The importance of these indicators was assessed to combine them into an indicator of the technological structure of the annual CC work programme. Its quantitative assessment has scientific and practical importance, providing an opportunity to analyse its impact on the results of commercial activities, to improve the organisational management structure of the company, etc.

      13  12Scopus© Citations 1
  • research article[2024][S1b][S003][23]
    Ejdys, Joanna
    ;
    Czerwińska, Magdalena
    ;
    Human technology., 2024, p. 155-177.

    The aim of the conducted research was to assess the attitude of the Polish society towards the use of artificial intelligence in medical diagnostics. In the research process, we sought answers to three research questions: how trust in the use of AI for medical diagnostics can be measured; if societal openness to technology determines trust in the use of AI for medical diagnostics purposes; and if a higher level of trust in the use of AI for medical diagnostics influences the potential improvement in the quality of medical diagnostics as perceived by Poles. The authors' particular focus was on the following three constructs and the relationships between them: openness to new technologies (OP), willingness to trust AI in medical diagnostics (T), and perceived impact of AI application on the quality of medical diagnostic services (PI). A survey was conducted on a representative sample of 1063 Polish respondents to seek answers to the above questions. The survey was conducted using the CATI technique.

      11  28Scopus© Citations 7
  • research article[2024][S1][S004][18]
    Economics and sociology., 2024, p. 315-332

    The conventional approach to assessing the developmental level of any socioeconomic system (SES) is to consider only its state in a given year. However, this approach does not adequately reflect the dynamic and complex nature of SES, which are inherently unstable due to their inertia. In other words, the development indicators at any point in time (year) of the considered period (CP) largely depend on the results of the development that occurred in the previous periods. This makes it difficult to adequately quantify the development of SES over a specific period. This paper presents a novel methodology for obtaining the SES sustained development index by combining the values of two parameters – intensity and uniformity. Since the former must take into account the totality of both positive and negative changes that occurred during the CP, correlation regression analysis is used to calculate the values. The latter is reflected by the value relationships of actual changes in individual periods of CP with SES development taking place without any deviations. Given that the importance of intensity and uniformity for sustained development is not the same, multi-criteria method is used to combine the values in a representative manner.

      11  10Scopus© Citations 4
  • research article[2024][S1b][S004][14];
    Journal of international studies., 2024, p. 83-96.

    The intensive use of non-renewable production resources and the associated growing environmental pollution forces us to look for new methods of halting these negative trends. Circular economy is one such method. This phenomenon is the subject of numerous studies attempting to assess its condition at both the micro and macro levels, the implementation of circular economy strategies, its environmental impact, the context of waste generation, etc. On the other hand, little attention is paid to assessing its efficiency. Technological efficiency, i.e., the relationship between material footprint and waste generation, is of particular importance, since the amount of waste generated primarily depends on the technology used at the time of production. Thus, this paper aims to analyse and assess the development of technological efficiency over a certain period of time. Further, it is necessary not only to build on the results of development at the end of this period, but also to assess the extent of the changes that have taken place during it in order to reflect the actual state of affairs. Thus, the final result takes into account both the intensity of the development of technological efficiency and the importance of its current state to the overall development process.

      4  23Scopus© Citations 15
  • research article[2023][S1b][S004][11]
    Journal of international studies., 2023, p. 166-176.

    In the European Union (EU), as a global economic community, there are countries with very different levels of economic development. Therefore, it takes place unevenly – some countries develop intensively, but with significant changes in it, others – stably, without significant changes, but not intensively, etc. In such a situation, it is important to determine adequately the current state of economic development. It is an integral quantity that combines both development changes and intensity. These two components of development form two of its partial indicators. Combined into one size, they comprehensively reflect the current situation of the country’s economic development. Development refers to a process, so it must be assessed not on the basis of the state at the end of the period under consideration, but on the whole of this period. The presentation of development in the sense of recent years does not reflect the overall development process, based on the economic development of countries 2018–2022. Their ranks are determined by the results of the comprehensive assessment. Since they do not adequately reflect the current situation, the countries were combined into homogeneous groups, where countries with close values of the economic development indicator were located. This allows to highlight the economic development trends of EU countries.

      11  12Scopus© Citations 5
  • research article[2023][S1][S004][14]
    Amfiteatru economic., 2023, p. 251-264.

    Investment in R & D today is an essential condition for the economic development of companies, industry as a whole and countries and regions. On the other hand, the financial capacity of economic operators is limited and it is important to know the benefits of these investments. In this context, the problem of their effectiveness is of particular importance. An adequate picture is provided by the analysis of the overall R & D process and its components - the impact on the creation of new knowledge; the impact of the new knowledge expressed in patents on the investment; the impact of innovation on the country's economic development. The study highlighted the following patterns: The developed countries of the European Union are characterised by higher R & D investment compared to developing countries, a significantly higher number of patent applications and the higher Global innovation index values. A different picture is with the effectiveness of R & D investment. Both patents and the entire investment processes are more efficient in the developing countries. This is due to a significant increase in patent sales in developed countries, a more decentralized innovation policy, i.e. significantly higher exports to other countries. All this distorts the picture of the actual effectiveness of R & D investments.

      8  21Scopus© Citations 6
  • research article[2023][S1b][S004][14]
    Doanh, Doung Cong
    ;
    Dufek, Zdenek
    ;
    Ejdys, Joanna
    ;
    ;
    Korzynski, Pawel
    ;
    Mazurek, Grzegorz
    ;
    Paliszkiewicz, Joanna
    ;
    Wach, Krzysztof
    ;
    Ziemba, Ewa
    Economics and Management = Ekonomia i zarządzanie., 2023, p. 76-89.

    The paper aims to identify how digital transformation and Generative Artificial Intelligence (GAI), in particular, affect the manufacturing processes. Several dimensions of the Industry 4.0 field have been considered, such as the design of new products, workforce and skill optimisation, enhancing quality control, predictive maintenance, demand forecasting, and marketing strategy. The paper adopts qualitative research based on a critical review approach. It provides evidence of the GAI technology support in the mentioned areas. Appropriate use of emerging technology allows managers to transform manufacturing by optimising processes, improving product design, enhancing quality control, and contributing to overall efficiency and innovation in the industry. Simultaneously, GAI technologies facilitate predictive analytics to forecast and anticipate future demand, quality issues, and potential risks, improve a marketing strategy and identify market trends.

      16  21Scopus© Citations 66
  • research article[2023][S1b][S004][9]
    Engineering management in production and services., 2023, vol. 15, no. 2, p. 46-54

    Various indicators are used to determine the level of company diversification. Their adequacy largely depends on the structure of the production programme. Its essential feature is the comparative weight of the main product in the total scope of the company’s work. In this situation, the intensity of the diversification process is reflected by the decrease in the volume of this product due to the inclusion of new products in the production programme. In this case, the adequacy of the diversification indicator can be reflected by comparing the scale of the main product with changes in the value of these indicators. The adequacy will be higher with more changes in the values of diversification indicators corresponding to changes in the volumes of the main product. Four indicators of corporate diversification are the most well-known and widely used: the Berry index, the entropy measure, Utton’s measure and the DG index. All of them have both strong and weak sides, so it is important to determine situations of the company’s production programme in which diversification indicators are appropriate to use, i.e., in which situations their adequacy is the greatest. The research has established that if the comparative weight of the main product of the production programme in the total scope of work is greater than 0.5, then the adequacy of the entropy measure and index DG is higher compared to the Berry index and Utton’s measure. If it is lower than 0.5, the other two diversification indicators should be used. The obtained results will help to more efficiently manage the process of diversification as a company’s development strategy.

      13  13Scopus© Citations 1
  • research article[2022][S1][S005][12]
    Economics and Sociology. Szczecin : Centre of Sociological Research, 2022, vol. 15, iss. 4., p. 219-230

    Particulate matter (PM 2.5), ozone, lead and radon are among the main sources of air pollution. The differences in mortality rates across the European Union due to their impact are very high, ranging from 4 to 16 times. Mortality from PM 2.5 particles is excreted 12.3 – fold compared to ozone, 4.6 – fold for lead and 10.6 – fold for radon. The state of economic development of countries and health expenditures have a significant impact on the rate of human mortality caused by air pollution. Their impact is uneven. Most of these depend on mortality from PM 2.5 particles, to a large extent from lead and ozone, and to a smaller extent to radon. All the countries of the European Union concerned pay considerable attention to health protection, since the level of the costs involved is closely linked to the per capita Gross Domestic Product (GDP). On the other hand, the real situation is illustrated by the trend in population mortality from the sources of air pollution in question. Absolute positive changes in population mortality from particulate matter (PM 2.5) have been observed over the period 2009‒2018 (the situation has improved in all countries); significant positive changes in mortality due to lead air pollution (the situation has improved in 13 countries); moderate and negative changes due to ozone contamination (the situation improved in 11 countries) and very strong negative changes in mortality due to air pollution by ozone (the situation improved in only 8 countries).

      18  19Scopus© Citations 3